What factors are related to the efficiency of cobblestone sand making machine-made sand?

Usually, cobblestone sand making equipment is selected for the production of construction sand and stone. High-energy and low-consumption cobblestone sand making equipment has a high degree of automation, low energy consumption, and high crushing rate. It is favored because of its good performance. Therefore, the sand making equipment The efficiency of sand making has attracted the attention of users. Here are the factors related to the efficiency of cobblestone sand making machine-made sand:

The performance of the cobblestone sand making machine itself

The reasonable design, wear resistance, quality, service life and failure rate of the cobblestone sand making machine are the main factors affecting the sand production efficiency of the sand making line, so it is necessary to choose good raw materials and a set of high-quality products. Advanced sand and gravel production line equipment can minimize these external factors and increase sand production.

Material properties:

The characteristics of the material include fineness, viscosity, humidity and hardness. The harder the material, the harder it is to break, and the heavier the wear of the sand making machine equipment, the slower the crushing speed, and the smaller the crushing capacity. The humidity of the material, that is, the moisture content in the material When it is larger, the material is easy to adhere to the sand making machine, and it is also easy to block during the unloading and conveying process, resulting in reduced crushing efficiency and high fineness of the crushed material, that is, the finer the crushed material, the smaller the crushing capacity and the higher the viscosity of the material.

The higher the height, the easier it is to adhere. And the high-viscosity material will adhere to the inner wall of the sand making machine. If it is not cleaned in time. It will seriously affect the work rate of the sand making machine and cause the sand making machine to fail to operate normally. When selecting a stone, it is important to be aware of all aspects of the stone’s properties.

Composition of material before crushing:

The more fine powder contained in the material before crushing, the greater the impact on crushing, because these fine powders are easy to adhere and affect transportation, so materials with a large fine powder content should be screened in advance, and fine powder should be screened from the material as much as possible to avoid Affect the normal production of the sand making machine.