Installation and maintenance of gravel equipment

The maintenance of sand and gravel equipment is an extremely important and regular work. It should be closely coordinated with correct operation and timely maintenance, and full-time personnel should be on duty to check.

Gravel Equipment Daily maintenance

1.The bearing bears the full load of the machine, so good lubrication has a great relationship with the life of the bearing. It directly affects the service life and operating rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be good.

2.The newly installed tires are prone to loosening and must be checked frequently.

3.Pay attention to whether all parts of the machine are working normally.

4.Pay attention to check the wear degree of wearable parts, and pay attention to replace worn parts at any time.

5.The plane of the bottom frame where the movable device is placed should remove dust and other objects to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, resulting in serious accidents.

6.If the bearing oil temperature rises, stop the machine immediately and check the cause to eliminate it.

7.If there is an impact sound when the rotating gear is running, it should be stopped immediately for inspection and eliminated.

Installation test run

1.The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.

2.When installing, pay attention to the verticality of the main body and the horizontal.

3.After installation, check whether the bolts in each part are loose and whether the door of the main engine is fastened. If so, please tighten it.

4.Configure the power cord and control switch according to the power of the equipment.

5.After the inspection, carry out the no-load test run, and the production can start after the test run is normal.