What are the reasons for the slow discharge of sand machine?

The output size of the sand machine is closely related to the production efficiency of the sand making machine. If the discharge of the stone sander is slow, the output of the stone sander will decrease, affecting the production efficiency of the stone sander. So what are the reasons for the slow discharge of sand making machine?

1. The feeding speed of the sand making machine is too fast

The slow discharge of sand machine is likely to be caused by too fast feed speed. Too fast feed speed will cause the machine load to increase, and these materials can not be processed in time, which will lead to slow discharge and even blockage. In this case, we should pay attention to the feeding speed, and adjust the feeding amount by observing the ammeter pointer of the equipment.

When the feed is large, the ammeter pointer will be too large. When it exceeds the rated current of sand making machines, it will cause the overload operation of sand making machines. If it is not treated in time, it will cause material blocking and may burn out the motor.

2. sand machine accessories aging, broken

There are many internal parts of the stone sander. When working for a period of time, there may be problems such as breaking, crushing, aging, screen sealing and so on, or the high water content of the material may also cause slow discharge.

In this case, we need to check, repair and timely replace the relevant parts of the equipment on a regular basis, and control the moisture content of the material. After working for a period of time, we also need to maintain the stone sander.

3. The air vent of the sand making machine is blocked

There is another reason for the slow discharge of the stone sander, that is, the vent is blocked. If the conveying equipment of the sand making machine is not matched, it may lead to the blockage of the vent, resulting in the slow discharge of the stone sander.

In this case, the air vent should be cleaned first, and then the corresponding conveying equipment should be replaced. And the cooperation of the equipment should be adjusted to ensure the normal and stable work of the stone sander.

This paper mainly introduces three reasons for the slow discharge of stone sander, and analyzes each reason and gives specific solutions. Only by ensuring the rationality of all aspects, can we ensure the smooth progress of sand making production.