What are the cleaning points of sand making equipment?

In the production process of sand making equipment. It is very necessary to clean the equipment to prolong the service life of the equipment and parts.

As for how to clean the sand making machine, we can refer to the following six points.

1. When cleaning sand making equipment, operators need to choose the correct cleaning solution. For example, the bearing cleaning fluid should be diesel or kerosene without water. The same hydraulic oil as the lubrication system, and diesel should not be used as the cleaning fluid. And when using the cleaning solution, the cleanliness of the cleaning solution should be ensured.
2. When cleaning the bearing, simple cleaning work is required, and the surface of the bearing can be cleaned with cleaning fluid. However, this method does not remove bearing viscosity, so careful bearing cleaning is required.
3. The cleaning of the bearing of the sand making machine is mainly to put the bearing into the container with diesel oil or cleaning liquid, rotate it slowly, and carefully check whether there is any sticky object on the surface of the bearing. If there is, it needs to be gently scrubbed with cotton yarn or a brush.
4. The parts of the sand making machine should be treated well after cleaning. For example, the bearing surface should be coated with anti-rust grease and dried. At the same time, the lubrication system needs to be replaced with new lubricating oil.
5. The cleaning of sand making equipment parts, such as nuts, bolts and other small parts, generally can be uniformly used vibration method. Put it into the cleaning basket or rack of the vibrating machine, completely immerse it in the cleaning solution, and use the cleaning solution for manual cleaning to remove the oil stains on the surface of the parts.
6. When cleaning the lubrication system of the sand making machine. It is necessary to convert the flowing liquid in the pipeline into a flocculation state, and complete the actions of each actuator to flush out the contaminants and impurities in the hydraulic cylinder and other components.

Keeping the sand making machine clean is also an indispensable link in the maintenance of the sand making machine. As for the cleaning method, please refer to the above 6 points.