How to reduce the phenomenon of sand making machine clogging

Analysis of sand making machine

Whether the design of the crushing cavity of the small sand making machine is appropriate has a great influence on the productivity, energy consumption, product size and shape, and wear of the lining plate of the small sander. Therefore, the design is the key to ensure the good working performance of the sander.

The working principle of sand making machine

In order to design the crushing cavity, it is necessary to accurately design the structural parameters of the crushing cavity. You can refer to the design style of the high-depth crushing cavity. The high-depth crushing cavity can reduce the blockage of the small sand making machine.

The crushing cavity of the sander consists of the space formed by the feed guide plate, the two-stage impact plate, the discharge point of the guide plate and the discharge arc of the di-level impact plate. , angle, etc.
The width of the inlet is 0.7 times the diameter of the rotor, and the size of the outlet is 0.1 times the diameter of the rotor.
Steering lean angle is an important parameter, usually 45-60 degrees. The greater the inclination of the guide plate, the faster the material slides down from the guide plate, and the height of the sander increases. On the contrary, the slower the material slides along the guide plate, and even the phenomenon of stacking occurs, and the height of the sander is reduced. Therefore, the inclination angle of the guide plate is suitable for a small value. The standard is that the material pulls the guide rail while touching the hammer, which is better.

Summary of this article

The above is how to reduce the blockage of the sand-making-machine. If the machine is blocked when we use it, we can try the above measures.