The use of sand making machine lubricant
Bearings of sand making machine is easy to wear. When the equipment is running, this part bears most of the load. So use a good lubricant at work and keep it clean at all times. If the lubricating oil is not clean, it will also increase the wear between bearings, bearings and other components.
In addition, care should be taken not to overheat the bearing, otherwise the operating efficiency of the bearing will decrease and affect the normal operation of the equipment. The V-belt of the transmission of the sand making equipment should be properly adjusted to ensure that the V-belt is evenly stressed when the dual motors are running, and should be reasonably distributed under the same strength. The maintenance of the transmission gear and the long-term friction between the transmission gears will also affect the machine’s performance. service life. Lubricants used to solve bearing problems are also important.
The new sand making machine is the product of the new era. Compared with traditional equipment, the new equipment has greatly improved product performance and price, which is reflected in the following aspects:
Problems related to the new type of sand making machine
Like the new type of crusher, the new type of sand making machine is characterized by the improvement of the working principle. For some of our modern scientific products, I believe most users are unaware of some of its features and benefits. We should take full advantage of them. For new sanders, it can crush hard stones, medium-hard stones, and dry sand. For example, similar to river pebbles, some have high water content, so the new sand maker can be used for dry sand production. As our production line technology, it can bring a lot of convenience. It has many features. First, it is relatively large in volume and relatively low in cost, and it can be used in many ways.
Better than the traditional sand making machine
The traditional has no new stability, and the maintenance rate is high. But the traditional ones are relatively cheap, but in terms of product performance and cost performance, more people are willing to choose new sand making machines. Compared with traditional methods, it can increase yield and reduce environmental pollution to a very low level.
Of course, there is not only one complete production line, but also many equipments, such as jaw crusher, cone crusher, vibrating screen, conveyor, etc. The selection of these large-scale equipment is based on full-process solutions and their actual needs. Not all production lines need to be equipped with a new sand making machine. If the requirements for the finished product are not high, the production line only needs one pulverization and two pulverization. But if the requirements for the finished product are high, it is recommended to choose a new sand making machine.
Today’s content is here. If you are looking for a sand making machine or have any other questions. You can call our service number at any time. The editor here reminds everyone to pay attention to maintenance during use.
