Correct feeding method of sand making production line

What is the correct feeding method of the sand making production line? Today, Xiaobian will explain in detail the detailed method of the correct feeding of the sand making production line. I hope it can help the majority of users to have a deeper understanding of the feeding of the Machine-made sand production line.

We know that the complete set of sand and gravel production line includes many braking systems, such as feeding system, crushing system, conveying system, sand making system, sand washing system, etc. These systems are all important components of the sand making production line, and they are indispensable.

The Machine-made sand production line will encounter various problems when working. The occurrence of various failures will reduce the efficiency of the sand making machine. Only by correctly operating the feeding system can the occurrence of problems be reduced. If the feeding system fails, the whole line will be damaged. The sand production line has a serious impact. Therefore, correct feeding is the premise to ensure the normal operation of the equipment. Wrong feeding will lead to blockage of the sand making equipment and even uneven discharge.

Correct feeding method:

First of all, we need to know the model of the sand making system when feeding, and determine the size of the feeding particle size according to the model. Then sometimes the customer does not carefully select the size of the stone when feeding the material, and the size of some stones has exceeded the size of the sand making machine. Grain size will cause the phenomenon of stone blockage.

Therefore, we check the size of the stone before feeding the material. If the stone does not meet the process requirements, we must screen it. The size of the stone should be smaller than the maximum size as far as possible, otherwise it will cause the sand-making equipment to run over load, cause damage to the sand-making equipment, and cause serious damage. ACCIDENT.