What should we pay attention to when maintaining sand production line equipment

No matter how good the equipment has a fault one day, and by the sand making machine, crusher and a series of machinery composed of sand production line, in its whole life, all the equipment has no fault, even if it is used users will smile and shake their heads! Therefore, as long as one of the equipment is not working, it will affect the entire production. At this time, it needs to be repaired to ensure that the sand production line will not stop because of a certain equipment.

The author has talked about this problem in the maintenance common sense of the jaw breaking machine in the sand production line, but it is somewhat general, only the crusher is described, and other equipment such as the sand making machine is not mentioned. Although the maintenance of these equipment, we need to pay attention to many common places, but there are also many differences.

Therefore, in this paper, will focus on the sand production line of several other equipment detailed, the following, to see what is the need for our attention to these equipment.

1. The tools needed at hand should be fully prepared. After determining the fault of the machine, how to maintain it should be done with a firm mind, so as to avoid the situation of “jam” when the parts are removed.

2. When unloading screws and nuts with tools, the force should be even, not too urgent or strong twist, so as not to screw the parts.

3. When you have to use wire cutters to clamp the file, scraper and other tools without a handle. The operator must be careful to avoid finger injury.

4. No matter which equipment in the sand production line is repaired, the equipment should be stopped during maintenance.

5, after the faulty equipment is repaired. It is necessary to go through the trial machine and check to prevent the equipment from being installed. And found that there are fewer parts or the equipment still cannot work normally.

The above is the maintenance of sand production line, in addition to the attention often mentioned on the Internet. Usually the details of misoperation is also the maintenance personnel need to pay more attention to. It give the user some suggestions. The user feedback information should also be timely reported to the technical department. I hope this article will be helpful to you.