Factors affecting the productivity of small sand making machines

Sand making machines are mainly divided into two types: hammer type and impact type in principle, and are mainly divided into horizontal type and vertical shaft type in structure. The production capacity of the small sand making machine is very closely related to the principle structure of the equipment. In comparison, hammer-type sand making machine has better production capacity when crushing low-hardness and low-abrasive materials, but the grain shape is poor; impact sand making machine has better production capacity and grain shape in processing hard materials.

Therefore, the production capacity of the small sand making machine depends on the equipment itself and the type of materials, and the principle and structure of the sand making machine also determine the ability of the sand making machine to handle different materials.

Generally speaking, the structure of hammer sand making machine is relatively simple, and the processing accuracy is not very high, but its anti-wear ability is limited, and it is often used for crushing soft materials such as limestone; while the structure of impact sand making machine is relatively complex, especially The processing precision is quite harsh, the anti-wear ability is strong, and the product grain shape is good. It is often used for high-quality product processing of hard materials such as basalt.

Therefore, the impact sand making machine has better comprehensive performance and higher production capacity. Different types of sand making machines are used to configure the sand making production line, and the correct selection must be made according to different types of materials and product quality requirements.

Taking the hammer sand making machine as an example, due to the large size of the feed allowed by the hammer sand making machine, for the sand making operation of soft materials (limestone), the hammer sand making machine can be used directly as a secondary crusher. , although the efficiency is low, it can work normally. In this case, the capacity of the hammer sand making machine must be better than that of the impact sand making machine.

For the impact sand making machine, the allowable feeding etiquette is basically below 60mm, and the small size sand making machine allows the feeding particle size to be smaller, even below 30mm. Therefore, when the impact sand making machine is configured in the sand making production line, it cannot be used as a secondary crusher, but for the production of high-quality artificial sand, the production capacity and quality advantages of the impact sand making machine are unparalleled.

To sum up, the selection of different types of sand making machines will lead to different process configurations, and the comprehensive production capacity of sand making machine production lines must be very different. Sand making machine manufacturers have rich experience and a lot of data reference in equipment selection and process design.