Two-stage crusher

Product description

Two-stage crusher is a new type raw material crusher which is also called two-rotor hammer tertiary crusher. This machine gets over the shortcomings of refractory discharging because of the high water content of the raw materials and has the advantages of high production efficiency and fine crushing.

Performance Principle

The upper and lower two levels of the double rotor crushing each other connected with two sets of rotor, so that the material crushed by the upper rotor is the hammer head of the rapid rotation of the lower rotor is broken again, the cavity material collision with each other at high speed, when the fans are broken, to achieve the effect of hammer powder, powder material, direct discharge.
There is no screen grate bottom, high moisture material, never blocked, traditional crusher with screen, when the water content of the material is high, it will burn out the motor.

Advantages

• 1. Two-stage crusher uses unique shifting gap adjusting technology, so that when the hammer is abraded, there is no need to repair it, but shift its position and the hammer can be used again, so that a pair of hammer can be used as three pairs.
• 2. This crusher runs in both ways, and continuous same-shift and bidirectional operation makes sure that the abrasion of the hammer and the toothed plate is even, thus reducing the frequency of stopping the machine to change the easy-wearing spare parts.
• 3. Two-stage crusher ahs even discharging granularity, big crushing ratio, high output and low energy consumption, and it can crush over 20 tons of materials every hour and the cost for crushing one ton of slag does not exceed 1.8 Yuan.

Technical specifications