Maintenance method of weathered stone sand making machine
The weathered stone sand making machine uses the weathered sand with rich resources as the raw material for sand making, and has the characteristics of convenient reclaiming, low cost, turning waste into treasure, reasonable process and feasible technology.
Working principle of weathered stone sand making machine
When the weathered sand making machine starts to work. First make sure that there is no material in the sand making machine, and then start the motor. Driven by the motor, the rotor in the crushing cavity of the weathered sand making machine rotates at a high speed. And the material enters the crushing cavity. The stone is crushed for the first time by the impact of the blow hammer on the rotor. And the stone falls into the second crushing chamber for the same crushing. When the crushing size reaches the requirement, the stone will pass through the grate. And be discharged from the discharge port and transported by the conveying equipment. to the next process.
Maintenance method of weathered stone sand making machine
If you want the equipment to have a longer service life in the operation, choosing high-quality equipment is the guarantee. But the maintenance of the equipment in the later period is the key. For the maintenance method of the weathered sand making machine, please see the following.
The bearings, throwing heads, hammer heads, rotors, etc. of the weathered sand making machine are all wearing parts. During production, the wear of these parts should be checked regularly, and the worn parts should be repaired in time. And the severely worn parts should be timely replacement
The bearing sleeve must be lubricated once every 8-10 hours of operation. And the lubricating oil and grease nipple must be kept clean when adding. Lubricating oil should cover all roller surfaces and spread evenly. After coating, restore the position of the outer ring of the bearing, and cover it with a plastic film to prevent dust.
Dust and debris in the weathered sand making machine affect the lubrication of the equipment, causing the equipment to lose lubrication and aggravate wear, resulting in abnormal noise during production. Therefore, we should clean the machine regularly to ensure that the weathered sand making machine is free of dust, grease, etc.